Filter
Top Products
2-30
Cisco MGX 8850 Multiservice Switch Installation and Configuration
Release 1.1.31, Part Number 78-11223-03 Rev. B0, May 2005
Chapter 2 Module and Service Descriptions
Frame Relay Service Modules
Card Illustrations
• Figure 2-14 is an illustration of the front card (applies to both the MGX-FRSM-8T1 and
MGX-FRSM-8E1).
• Figure 2-15 is an illustration of the FRSM T1 and E1 back cards.
–
AX-RJ48-8T1 is the T1 back card. An AX-R-RJ48-8T1 is required for redundancy support.
–
AX-RJ48-8E1 and AX-SMB-8E1 are the E1 back cards for RJ48 and SMB connections. A
special AX-R-SMB-8E1 card is required for redundancy support.
Figure 2-14 MGX-FRSM-8T1
PORT 1
PORT 2
PORT 3
PORT 4
PORT 5
PORT 6
PORT 7
PORT 8
17912
ACT
STBY
FAIL
FRSM
8T1