Filter
Top Products
4-28
Cisco CRS-1 Carrier Routing System 8-Slot Line Card Chassis Installation Guide
OL-6256-08
Chapter 4 Installing and Removing MSCs, PLIMs, and Associated Components
How to Install or Remove a Switch Fabric Card
Prerequisites
Before performing this task, remove any front cover plates.
Caution Removing more than one switch fabric card at a time can misalign the chassis and may damage the card
or chassis when reinserting the cards. Remove and reinsert only one card at a time.
Required Tools and Equipment
You need the following tools to perform this task:
• ESD-preventive wrist strap
• Large Phillips screwdriver
Steps
To remove a switch fabric card, see Figure 4-21 and follow these steps:
Figure 4-21 Removing a Switch Fabric Card
1 Captive screw 3 Direction of installation or removal
2 Ejector lever
3
1
2
122921