Filter
Top Products
207 LDAP Feature for the Remote Console Switch
1
Select the
Privileges Object
tab and click
Add
.
2
Type the Privilege Object name and click
OK
.
Click the Products tab to add one or more SIP devices to the association. The
associated devices specify the SIP devices connected to the network that are
available for the defined users or user groups.
NOTE: You can add multiple SIP devices to an association object.
To add SIP devices or SIP device groups:
1
Select the
Products
tab and click
Add
.
2
Type the SIP device or SIP device group name and click
OK
.
3
In the Properties window, click
Apply
and then
OK
.
Console Redirection Access Security
In any Remote Console Switch installation, any user privilege allows the user
to launch the on-board web interface. The on-board web interface
functionality for that user is limited by the User Privilege level established in
the Remote Console Switch. LDAP with Dell Extended Schema adds an
extra level of security to appliance management by allowing administrators to
limit a user's access to the on-board web interface.
Authorization to use the on-board web interface is defined by whether User
Privilege level is or is not configured in the KVM Appliance Privileges tab of
the Dell Privilege Object (DPO). The Console Redirection Access checkbox
in the KVM SIP Privileges tab of the DPO provides the means for a user who
cannot view the on-board web interface to launch Video Viewer sessions to a
subset of SIPs through the RCS Client. This authorization is controlled by a
combination of the configuration parameters set in the DPO and the SIP
Objects contained in the Dell Association Object (DAO).
If you do not wish a user to have authorization to access the on-board web
interface, but you do wish them to be able to launch viewer sessions from the
RCS Client, perform the following steps:
1
Create a Dell SIP object for each SIP that the User(s) is (are) allowed to
access.
2
Create an Active Directory User account for each of the users to be
controlled.