Filter
Top Products
81 Remote Console Switch Software Basic Operations
Figure 4-10. Server Network Properties Tab
4
Click
Apply
to save the new settings.
-or-
Click
OK
to save the new settings and close the window.
-or-
Click
Cancel
to exit without saving the new settings.
Changing Switch Network Properties
If you were to reconfigure your network, you can use the
Network
tab to change
the IP address for a switch.
To change network properties:
1
In the Remote Console Switch Software, click the
Remote Console
Switches
tab and then select an individual unit in the
Unit Selector
list.
2
Select
View - Properties
from the Explorer menu.
-or-
Click the
Properties
task button.
-or-
Right-click the unit and select
Properties
. The
Properties
dialog box
appears.