Filter
Top Products
Dell Manager 189
Management Menu Options
Table 12-2 displays the options for the Dell Manager Management Menu.
Using Dell Manager in Red Hat Linux GUI Mode
On a Red Hat Linux system, for Dell Manager to work correctly in a
terminal in GUI Mode, you must:
• Set the terminal type to linux.
• Set the keyboard mappings to linux.
Perform the procedure in this section if you use konsole, gnome terminal, or
xterm.
The linux console mode, which you select from the terminal with the File—
> Linux Console command, works correctly by default. The text mode
console (non-GUI) also works correctly by default.
Perform the following steps to prepare the system to use Dell Manager in
Red Hat Linux GUI mode:
1 Start the Terminal.
2 Before you enter dellmgr to start Dell Manager, type the following
commands:
TERM=linux
Export TERM
Table 12-2. Management Menu Options
Option Description
Initialize Select this option to initialize one or more logical drives.
Objects Select this option to individually access controllers, logical
drives, and physical drives.
Format Select this option to low-level format physical drives.
Rebuild Select this option to rebuild failed physical drives.
Check
Consistency
Select this option to verify redundancy data in logical drives
using RAID level 1 or 5. PERC 3 automatically corrects any
differences found in the data.
Reconstruct Select this option to reconstruct an array.