Filter
Top Products
Use the show ip redirect-list (without the list name) to display all the redirect-lists configured
on the device.
Dell#show ip redirect-list
IP redirect-list rcl0:
Defined as:
seq 5 permit ip 200.200.200.200 200.200.200.200 199.199.199.199
199.199.199.199
seq 10 redirect 1.1.1.2 tcp 234.224.234.234 255.234.234.234
222.222.222.222/24 eq 40 ack, Next-hop reachable
(via Te 2/1/1),
Applied interfaces:
Te 2/2/1
NOTE: If you apply the redirect-list to an interface, the output of the show ip redirect-
list redirect-list-name
command displays reachability status for the specified next-hop.
Example: Showing CAM PBR Configuration
Dell#show cam pbr stack-unit 1 port-set 0
TCP Flag: Bit 5 - URG, Bit 4 - ACK, Bit 3 - PSH, Bit 2 - RST, Bit 1 - SYN,
Bit 0 - FIN
Cam Port VlanID Proto Tcp Src Dst SrcIp DstIp Next-hop
Egress
Index Flag Port Port MAC Port
----------------------------------------------------------------------------
-------------------------------------
06080 0 N/A IP 0x0 0 0 200.200.200.200
200.200.200.200
199.199.199.199 199.199.199.199 N/A NA
06081 0 N/A TCP 0x10 0 40 234.234.234.234 255.234.234.234
222.222.222.222/
24 00:00:00:00:00:09 8/1
Sample Configuration
The following configuration shows setting up a PBR. These are not comprehensive directions. They are
intended to give you a some guidance with typical configurations. You can copy and paste from these
examples to your CLI. Be sure you make the necessary changes to support your own IP addresses,
interfaces, names, and so forth.
The Redirect-List GOLD defined in this example creates the following rules:
• description Route Gold traffic to the DS3
• seq 5 redirect 10.99.99.254 ip 192.168.1.0/24 any “ Redirect to next-hop router IP 10.99.99.254 any
traffic originating in 192.168.1.0/24”
• seq 10 redirect 10.99.99.254 ip 192.168.2.0/24 any “ Redirect to next-hop router IP 10.99.99.254 any
traffic originating in 192.168.2.0/24”
• seq 15 permit ip any
686
Policy-based Routing (PBR)