Filter
Top Products
Port Monitoring
The S6000–ON supports multiple source-destination statements in a single monitor session.
The maximum number of source ports that can be supported in a session is 128.
The maximum number of destination ports that can be supported is 4 per port pipe.
In the following examples, ports 1/13/1, 1/14/1, 1/15/1, and 1/16/1 all belong to the same port-pipe. They
are pointing to four different destinations (1/1/1, 1/2/1, 1/3/1, and 1/37/1). Now it is not possible for
another source port from the same port-pipe (for example, 1/17/1) to point to another new destination
(for example, 1/4). If you attempt to configure another destination (to create 5 MG port), this message
displays: % Error will be thrown in case of RPM and ERPM features.
Example of Changing the Destination Port in a Monitoring Session
Dell(conf-mon-sess-5)#do show moni session
SessID Source Destination Dir Mode Source IP Dest IP
------ ------ ----------- --- ---- --------- --------
1 Te 1/1/1 Te 2/1/1 both Port N/A N/A
2 Te 1/1/1 Te 2/2/1 both Port N/A N/A
3 Te 1/1/1 Te 2/3/1 both Port N/A N/A
4 Te 1/1/1 Te 2/4/1 both Port N/A N/A
5 Te 1/1/1 Te 2/5/1 both Port N/A N/A
Dell(conf-mon-sess-5)#
Dell(conf)#mon ses 300
Dell(conf-mon-sess-300)#source tengig 1/17/1 destination tengig 1/4/1 direction
tx
% Error: Exceeding max MG ports for this MD port pipe.
Dell(conf-mon-sess-300)#
Dell(conf-mon-sess-300)#source tengig 1/17/1
destination tegnig 1/1/1 direction
tx
Dell(conf-mon-sess-300)#do show mon session
SessionID Source Destination Direction Mode Type
--------- ------ ----------- --------- ---- ----
0 Te 1/13/1 Te 2/1/1 rx interface Port-based
10 Te 1/14/1 Te 2/2/1 rx interface Port-based
20 Te 1/15/1 Te 2/3/1 rx interface Port-based
30 Te 1/16/1 Te 2/7/1 rx interface Port-based
300 Te 1/17/1 Te 1/1/1 tx interface Port-based
Dell(conf-mon-sess-300)#
Example of Configuring Another Monitoring Session with a Previously Used Destination Port
Dell(conf)#mon ses 300
Dell(conf-mon-sess-300)#source TenGig 1/17/1 destination TenGig 1/4/1 direction
tx
% Error: Exceeding max MG ports for this MD port pipe.
Dell(conf-mon-sess-300)#
Dell(conf-mon-sess-300)#source TenGig 1/17/1 destination TenGig 1/1/1 direction
tx
Dell(conf-mon-sess-300)#do show mon session
SessionID Source Destination Direction Mode Type
--------- ------ ----------- --------- ---- ----
0 Te 1/13/1 Te 1/1/1 rx interface Port-based
10 Te 1/14/1 Te 1/2/1 rx interface Port-based
20 Te 1/15/1 Te 1/3/1 rx interface Port-based
30 Te 1/16/1 Te 1/7/1 rx interface Port-based
300 Te 1/17/1 Te 1/1/1 tx interface Port-based
700
Port Monitoring