Filter
Top Products
Chapter 23 Velocity Motion Control API | PCI-DMC-A01 / PCI-DMC-B01
Revised March, 2012 23-3
23.2 _DMC_01_sv_move
FORMAT
I16 PASCAL _DMC_01_sv_move(U16 CardNo, U16 NodeID,U16 SlotID, I32 StrVel,
I32 MaxVel, F64 Tacc,I16 Dir)
Purpose
Velocity motion control with S-curve velocity cross-section.
Parameters
Name Data Type Unit Description
CardNo U16 Number Unit CardNo is between 0~15
NodeID U16 Number Unit Node ID
SlotID U16 Number Unit Slot ID
StrVel I32
Pulses per
second
Starting velocity parameter
MaxVel I32
Pulses per
second
Maximum velocity parameter
Tacc F64 Second Specified acceleration time
Dir I16 Selection
0: In positive direction
1: In negative direction
Description
Figure 23.2 Illustration of S-curve motion speed constant
Example
U16 CardNo=0, NodeID=1, SlotID=0, PDO_enable=1;
I32 StrVel=100, MaxVel=5000;
F64 Tacc=0.1;
I16 Dir =1;
I16 status= _DMC_01_sv_move(CardNo, NodeID, SlotID, StrVel, MaxVel, Tacc, Dir);