Filter
Top Products
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
115
Parameter Description
Loopdetect Status
Use the drop-down menu to enable or disable loopback detection. The default is Disabled.
Interval (1-32767)
Set a Loopdetect Interval between 1 and 32767 seconds. The default is 10 seconds.
Recover Time (0 or
60-1000000)
Time allowed (in seconds) for recovery when a Loopback is detected. The Loopdetect
Recover Time can be set at 0 seconds, or 60 to 1000000 seconds. Entering 0 will disable the
Loopdetect Recover Time. The default is 60 seconds.
Mode
Use the drop-down menu to toggle between Port_ Based and VLAN_ Based.
From
Use the drop-down menu to select a beginning port number.
To
Use the drop-down menu to select an ending port number.
State
Use the drop-down menu to toggle between Enable and Disable.