Filter
Top Products
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
182
Figure 8- 68. DVMRP Interface Settings - Edit window
The following fields can be set:
Parameter Description
Interface Name
Displays the name of the IP interface for which DVMRP is to be configured. This must be a
previously defined IP interface.
IP Address
Displays the IP address corresponding to the IP Interface name entered above.
Neighbor Timeout
Interval (1-65535
sec)
This field allows an entry between 1 and 65,535 seconds and defines the time period DVMRP
will hold Neighbor Router reports before issuing poison route messages. The default is 35
seconds.
Probe Interval (1-
65535 sec)
This field allows an entry between 1 and 65,535 seconds and defines the interval between
‘probes’. The default is 10.
Metric (1-31)
This field allows an entry between 1 and 31 and defines the route cost for the IP interface.
The DVMRP route cost is a relative number that represents the real cost of using this route in
the construction of a multicast delivery tree. It is similar to, but not defined as, the hop count
in RIP. The default cost is 1.
State
This field can be toggled between Enabled and Disabled and enables or disables DVMRP for
the IP interface. The default is Disabled.
Click Apply to implement changes made. Click Show All DVMRP Interface Entries to return to the DVMRP Interface Settings
window.