Filter
Top Products
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
316
Clear All Entry
Clicking this button will allow the user to delete all entries of the address table.
IP Address Table
The IP Address Table is a read only screen where the user may view IP addresses discovered by the Switch. To search a specific
IP address, enter it into the field labeled IP Address at the top of the screen and click Find to begin your search. To view the
following table, click Monitoring > IP Address Table.
Figure 12- 21. IP Address Table windowBrowse Routing Table
This screen shows the current IP routing table of the Switch. To find a specific IP route, enter an IP address into the Destination
Address field along with a proper subnet mask into the Mask field and click Find. To view this table, click Monitoring >
Browse Routing Table.
Figure 12- 22. Browse Routing Table window
Browse ARP Table
This window will show current ARP entries on the Switch. To search a specific ARP entry, enter an interface name into the
Interface Name or an IP address and click Find. To clear the ARP Table, click Clear All. To view this table, click Monitoring
> Browse ARP Table.