Filter
Top Products
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
189
Figure 8- 77. PIM Candidate RP Settings – Add window
The following fields can be viewed or set:
Parameter Description
Group Address
Enter the multicast group address for this CRP. This address must be a class D address.
Group Mask
Enter the mask for the multicast group address stated above.
Interface Name
Enter the name of the PIM-SM enabled interface the switch administrator wishes to become
the CRP for this group.
Click Apply to implement changes made.
PIM Register Checksum Settings
This window is used to set a first hop router to create checksums to be included with the data in Registered packets. To view this
window, click Configuration > Layer 3 IP Networking > IP Multicast Routing Protocol > PIM Protocol > PIM Register
Checksum Settings.
Figure 8- 78. PIM Register Checksum Include Data RP List Settings window
To configure the settings for this window, click the Add button, which will reveal the following window for the administrator to
configure.
Figure 8- 79. PIM Register Checksum Include Data RP List Settings - Add window
The following fields can be set:
Parameter Description
RP Address
Enter the IP address of the RP that will verify checksums included with Registered packets.
Click Apply to set the RP as a checksum enabled router.