Filter
Top Products
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
29
Web Pages
When users connect to the management mode of the Switch with a web browser, a login window is displayed. Enter a user name
and password to access the Switch's management mode.
Below is a list and description of the main folders available in the web interface:
Administration – Contains windows concerning Device Information, IP Address, Port Configuration, PoE Configuration (for the
DES-3828P), User Accounts, Port Mirroring, System Log Settings, System Severity Settings, SNTP Settings, MAC Notification
Settings, TFTP Services, Multiple Image Services, Dual Configurations Services, Ping Test, SNMP Manager, and Single IP
Management Settings.
Layer 2 Features – Contains windows concerning VLAN, Trunking, IGMP Snooping, Spanning Tree and Forwarding.
Layer 3 Features – Contains windows concerning IP Interfaces Settings, MD5 Key Settings, Route Redistribution Settings,
Static/Default Route Settings, Route Preference Settings, Static ARP Settings, RIP, OSPF, DHCP/BOOTP Relay, DNS Relay,
VRRP, and IP Multicast Routing Settings.
QoS – Contains windows concerning Bandwidth Control, QoS Scheduling Mechanism, QoS Output Scheduling, 802.1P Default
Priority, 802.1P User Priority and WRED Settings.
ACL – Contains the window for the Access Profile Table and CPU Interface Filtering.
Security – Contains windows for Traffic Control, Port Security, Port Lock Entries, 802.1x, Trusted Host, Access Authentication
Control, Traffic Segmentation, SSL, SSH, IP-MAC Binding, Limited IP Multicast Range, Web-based Access Control, MAC-
based Access Control and Safeguard Engine.
Monitoring – Contains windows for Device Status, CPU Utilization, Safeguard Engine Status, Port Utilization, Packets, Errors,
Packet Size, Browse Router Port, Port Access Control, MAC Address Table, IP Address Table, Browse Routing Table, Browse
ARP Table, Browse IP Multicast Forwarding Table, IGMP Snooping Group, IGMP Snooping Forwarding, Browse IGMP Group
Table, DVMRP Monitor, PIM Monitor, OSPF Monitor, Browse PoE Status, Browse WRED Settings and Switch Log.
NOTE: Be sure to configure the user name and password in the User
Accounts menu before connecting the Switch to the greater network.