Filter
Top Products
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
190
PIM Static RP Settings
This window is used to view the Static RP settings for this router. To view this window, click Configuration > Layer 3 IP
Networking > IP Multicast Routing Protocol > PIM Protocol > PIM Static RP Settings.
Figure 8- 80. PIM Static RP Settings window
To configure the settings for this window and set this router as the Static RP, click the Add button, which will reveal the
following window for the administrator to configure.
Figure 8- 81. PIM Static RP Settings – Add window
The following fields can be set:
Parameter Description
Group Address
Enter the multicast group IP address to identify who is the RP. This address must be a class
D address.
Group Mask
Enter the mask for the Group address stated above.
RP Address
Enter the RP’s IP address to be set for the Group Address stated above.
Click Apply to set the static RP.