Filter
Top Products
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
126
Route Redistribution Settings
Route redistribution allows routers on the network, which are running different routing protocols to exchange routing information.
This is accomplished by comparing the routes stored in the various routers’ routing tables and assigning appropriate metrics. This
information is then exchanged among the various routers according to the individual router’s current routing protocol. The Switch
can redistribute routing information between the OSPF and RIP routing protocols to all routers on the network that are running
OSPF or RIP. Routing information entered into the Static Routing Table on the local switch is also redistributed.
The following table lists the allowed values for the routing metrics and the types (or forms) of the routing information that will be
redistributed to RIP and OSPF protocol respectively.
Route Source Metric Type
OSPF 0 to 16
All
Internal
External
ExtType1
ExtType2
Inter-E1
Inter-E2
Static 0 to 16 not applicable
Local 0 to 16 not applicable
Route Source Metric Metric Type
RIP 0 to 16777214 Type-1
Type-2
Static 0 to 16777214 Type-1
Type-2
Local 0 to 16777214 Type-1
Type-2
Table 8- 3. Route Redistribution Source tables
This window will redistribute routing information between the OSPF and RIP routing protocols to all routers on the network that
are running OSPF or RIP. To access the Route Redistribution Settings window, go to > L3 Features > Route Redistribution
Settings:
Figure 8- 7. Route Redistribution Settings and Table window
Route Destination:
RIP
Route Destination:
OSPF