Filter
Top Products
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
72
Help
• About - Will display the SIM information, including the current SIM version.
NOTE: Upon this firmware release, some functions of the SIM can only be
configured through the Command Line Interface. See the DES-3800 CLI
Manual for more information on SIM and its configurations.
Packet to CPU Settings
This screen is used to enable or disable the feature that controls whether to capture IP packets with a Zero TTL to the CPU. In the
DES-3800 series the default setting for this feature is off. If you disable this feature, the device will not respond to traceroute
packets.
To access the following window, click Administration > Packet to CPU Settings.
Figure 6- 50. Packet to CPU Settings window
Choose Enabled/Disabled from the Use Zero TTL IP State drop-down menu to enable or disable the Zero TTL IP State on the
Switch. Click the Apply button to apply the change.