Filter
Top Products
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
18
Switch to Hub or Switch
These connections can be accomplished in a number of ways using a normal cable.
• A 10BASE-T hub or switch can be connected to the Switch via a twisted-pair Category 3, 4 or 5 UTP/STP cable.
• A 100BASE-TX hub or switch can be connected to the Switch via a twisted-pair Category 5 UTP/STP cable.
• A 1000BASE-T switch can be connected to the Switch via a twisted pair Category 5e UTP/STP cable.
• A switch supporting a fiber-optic uplink can be connected to the Switch’s SFP ports via fiber-optic cabling.
• The Switch can be changed to PoE mode using the Mode Select button. When in PoE Mode, the DES-3828P will work
with all D-Link 802.3af capable devices. The Switch also works in PoE mode with all non-802.3af capable D-Link AP,
IP Cam and IP phone equipment via DWL-P50.
Figure 3- 2. Switch connected to a normal (non-Uplink) port on a hub or switch using a straight or crossover
cable
NOTICE: When the SFP transceiver acquires a link, the associated
integrated 10/100/1000BASE-T port is disabled.