Filter
Top Products
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
275
IP-MAC Binding Port
To enable or disable IP-MAC binding on specific ports, click Security > IP-MAC Binding > IP-MAC Binding Port to view the
IP-MAC Binding Ports Setting window. Select a port or a range of ports with the From and To fields. Enable or disable the port
with the State, allow_zero_IP and forward_DHCP packet field, and configure the port’s maximum entry. The user may also
enable the ACL Mode for IP-MAC Binding which will create two Access Profile Entries on the Switch, as previously stated. The
Trap/Log field will enable and disable the sending of trap log messages for IP-MAC binding. When enabled, the Switch will send
a trap log message to the SNMP agent and the Switch log when an ARP packet is received that doesn’t match the IP-MAC
binding configuration set on the Switch. Click Apply to save changes.
Figure 11- 50. IP-MAC Binding Ports window
The following fields can be set or modified: