Filter
Top Products
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
156
Retransmit Time
A read only field that denotes the time between LSA retransmissions over this interface, in
seconds.
Active or Passive
Interface
The user may select Active or Passive for this OSPF interface. Active interfaces actively
advertise OSPF to routers on other Intranets that are not part of this specific OSPF group.
Passive interface will not advertise to any other routers than those within its OSPF intranet.
OSPF Virtual Link Settings
Click the OSPF Virtual Interface Settings link to view the current OSPF Virtual Interface Settings. There are not virtual
interface settings configured by default, so the first time this table is viewed there will be not interfaces listed. To add a new OSPF
virtual interface configuration set to the table, click the Add button. A new menu appears (see below). To change an existing
configuration, click on the hyperlinked Transit Area ID for the set you want to change. The menu to modify an existing set is the
same as the menu used to add a new one. To eliminate an existing configuration, click the
in the Delete column.
Figure 8- 35. OSPF Virtual Interface Settings
The status of the virtual interface appears (Up or Down) in the Status column.
Figure 8- 36. OSPF Virtual Link Settings – Add