Filter
Top Products
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
265
The Broadcast Segmentation window is divided into three main sections, Broadcast Filter Ports, ARP Forward Ports and
Broadcast Segmentation Table.
The user may set the following parameters for the Broadcast Filter Ports section:
Parameter Description
Ports
Check the corresponding boxes for the port(s) that you want to apply the Broadcast Filter to.
When a port is checked, the broadcast, unknown multicast from other ports to this port will
be dropped; the broadcast, unknown multicast from this port to other un-checked ports will
still be forwarded.
The user may set the following parameters for the ARP Forward Ports section:
Parameter Description
Ports
Check the corresponding boxes for the port(s) that you want to enable ARP Forwarding on.
When a port is checked, the ARP packets, which are broadcast packets, from other ports to
this port will be forwarded.
Click the Apply button to save the changes.
The following parameters are displayed in the Broadcast Segmentation Table:
Parameter Description
Port
Displays each of the switches ports in sequential order.
Filter State
Displays the Filter State of the switch port.
ARP Forward State
Displays the ARP Forward State of the switch port.