Filter
Top Products
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
279
Limited IP Multicast Range
The Limited IP Multicast Range Profile Settings window allows the user to add a profile where multicast address(es) reports
will be received on specified ports on the Switch. This function will therefore limit the number of reports received and the number
of multicast groups configured on the Switch. The user may set an IP address or range of IP addresses to accept reports (Permit) or
deny reports (Deny) coming into the specified switch ports. Click Security > Limited IP Multicast Range > Limited IP
Multicast Range Profile Settings to view the window shown below:
Figure 11- 54. Limited IP Multicast Range Profile Settings Window
To configure a Limited IP Multicast Range Profile Click the Add button, which will reveal the following window:
Figure 11- 55. Limited IP Multicast Range Profile - Add Window
Parameter Description
Profile ID (1-24)
Enter a Profile ID between 1 - 24.
Description
Enter a description for the IP Multicast Range Profile.
From Multicast IP
Enter the lowest multicast IP address of the range.
To Multicast IP
Enter the highest multicast IP address of the range.
Click Add to implement the new profile on the Switch.
Limited IP Multicast Range Port Settings
The Limited IP Multicast Range Port Settings enables the user to configure the ports on the switch that will be involved in the
Limited IP Multicast Range. The user can configure the range of multicast ports that will be accepted by the source ports to be
forwarded to the receiver ports. To configure these settings, click Security > Limited IP Multicast Range to open the Limited
IP Multicast Range Port Settings window shown below: