Filter
Top Products
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
159
Advertisement
Select Enabled or Disabled to determine whether the selected OSPF Area will advertise it’s
summary LSDB (Network-Number and Network-Mask).
Click Apply to implement changes made.
OSPF Host Route Settings
OSPF host routes work in a way analogous to RIP, only this is used to share OSPF information with other OSPF routers. This is
used to work around problems that might prevent OSPF information sharing between routers. To configure OSPF host routes,
click the OSPF Host Route Settings link. To add a new OSPF Route, click the Add button. Configure the setting in the menu
that appears. The Add and Modify menus for OSPF host route setting are nearly identical. The difference being that if you are
changing an existing configuration you will be unable to change the Host Address. To change an existing configuration, click on
the hyperlinked Host Address in the list for the configuration to change and proceed to change the metric or area ID. To eliminate
an existing configuration, click the
in the Delete column for the configuration being removed.
Figure 8- 40. OSPF Host Route Settings table
Use the menus below to add or edit OSPF host routes.
Figure 8- 41. OSPF Host Route Settings - Add
Figure 8- 42. OSPF Host Route Settings - Edit
Specify the host route settings and click the Apply button to add or change the settings. The new settings will appear listed in the
OSPF Host Route Settings list. To view the previous window, click the Show All OSPF Host Route Entries
link to return to the
previous window.
The following fields are configured for OSPF host route:
Parameter Description
Host Address
The IP address of the OSPF host.