Filter
Top Products
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
62
SNMP Engine ID
Figure 6- 33. SNMP Engine ID Configuration window
To change the Engine ID, type the new Engine ID in the space provided and click the Apply button.
SNMP Trap Settings
The following window is used to enable and disable trap settings for the SNMP function on the Switch. To configure the SNMP
Trap Settings, click Administration > SNMP Manager > SNMP Trap:
Figure 6-34. SNMP Trap Settings window
To enable or disable the Traps State and/or the Authenticate Traps State, use the corresponding pull-down menus to change the
settings and click Apply.
The Engine ID is a unique identifier used for SNMP V3
implementations. This is an alphanumeric string used to
identify the SNMP engine on the Switch. To display the
Switch's SNMP Engine ID, click Administration >
SNMP Manger > SNMP Engine ID. This will open
the SNMP Engine ID Configuration window, as
shown below.