Filter
Top Products
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
36
Port Configuration
This section contains information for configuring various attributes and properties for individual physical ports, including port
speed and flow control.
Port Settings
Figure 6- 3. Port Configuration window
The following parameters can be configured:
Parameter Description
From / To Use the pull-down menus to select the port or range of ports to be configured.
State
Toggle this field to either enable or disable a given port or group of ports.
Speed/Duplex
Toggle the Speed/Duplex field to either select the speed and duplex/half-duplex state of the port.
Auto denotes auto-negotiation between 10 and 100 Mbps devices, in full- or half-duplex. The Auto
setting allows the port to automatically determine the fastest settings the device the port is
connected to can handle, and then to use those settings. The other options are Auto, 10M/Half,
10M/Full, 100M/Half, 100M/Full and 1000M/Full. There is no automatic adjustment of port settings
with any option other than Auto.
Click Administration > Port Configuration >
Port Settings to display the following window:
To configure switch ports:
1. Choose the port or sequential range of
ports using the From…To… port pull-
down menus.
2. Use the remaining pull-down menus to
configure the parameters described
below: