Filter
Top Products
90003749(1) [NGA-e (Software CLD 2.3/MLT 3.1.X)] 04/98
NGA 2000
6 - 5
Set up the number of digits:
♦ Select one of the two lines of variables with the ↓↓ -key or the ↑↑ -key.
♦ Select the number with the ENTER key or the →→ -key.
♦ Select the digit with the ↑↑ -key or the ↓↓ -key.
Options: Maximum total number of digits: 3, 4, 5, 6
Digits after the decimal point: 0, 1, 2, 3.
♦ Confirm the new value with the ENTER key or cancel and go back to the last value with
the F2 key.
Example:
♦ Measured number: 1.2345
♦ Select 3 for total number of digits and 2 for digits after decimal point.
♦ The screen will display: 1.23
Menu line "Auxiliary lines...":
From the menu "Main display configuration" you can change via the line "Auxiliary lines..."
to the corresponding menu:
HOME ESCAPE INFO
CLD
F1 F2 F3 F4 F5
95.0 ppm
Display resolution
Maximum total number of digits: 4
Digits after the decimal point: 2
HOME ESCAPE NEXT INFO
CLD
F1 F2 F3 F4 F5
95.0 ppm
Auxiliary lines
First auxiliary line: Enabled
Third auxiliary line: Enabled
Fourth auxiliary line: Enabled
First line source...
Second line source...
Last line source...
Second auxiliary line: Enabled
Third line source...