Filter
Top Products
6 - 18
NGA 2000
90003749X(1) [NGA-e (Software CLD 2.3/MLT 3.1.X)] 04/98
Main Menu — Technical level configuration
↓↓
Service menus
↓↓
Manufacturing data
↓↓
Control module data
↓↓
In the menu "Control Unit Manufacturing Data" you will find the hardware and the software
revision number and the serial number of the control module.
The control module data in the first four lines are set up by the manufacturer. It is only
necessary to change the data if something as the software revision number will change.
Note: If you have questions about the control module give the serial number of the first
line to the customer service!
You can change via the line "Revision notes..." to the corresponding submenu where you
will find the current revision note of the NGA software.
In the line "User tag number" you will find the control module tag of the platform.
Set up parameters:
♦ Select any line of variables or the menu line with the ↓↓ -key or the ↑↑ -key.
♦ Select the variable or change to the submenu with the ENTER key or the →→ -key.
♦ Select any digit with the ←← -key or the →→ -key and adjust a new value with
the ↑↑ -key or the ↓↓ -key.
♦ Confirm the new value with the ENTER key or cancel and go back to the last value with
the F2 key.
HOME ESCAPE INFO
CLD
F1 F2 F3 F4 F5
95.0 ppm
Control Unit Manufacturing Data
Control unit serial number: CM1
Hardware revision number: ACU-01/C
Software revision number: 3
Revision notes...
User tag number: NGA Control module
Manufacturing date code: 16.11.1997
6.2.1 Service Menus
Control Module Data