Filter
Top Products
System Calibration
90003749(1) [NGA-e (CLD-Software 2.3/MLT-Software 3.1.X)] 04/98 NGA 2000 Supplement - 5
It is also possible to configure the DIO-outputs via LON-Variables (i.e. SLTA-adapter or
AK-protocol).
Therefore is the LON-variable "DIOOUT_ENTRYSIG" which corresponds to
DIOOUTSIGC and evaluates enum-values of ST1NAME (enum-values 0..19) or
ST2NAME (enum-values 20..39).
For digital output we have to setup variables in following order.
1. DIOSLOTIDC
2. DIOOUTNUMC
3. DIOOUTSRCC
4. DIOOUT_ENTRYSIG SYS: VALVE-1 = 20 (enum-value in ST2NAME)
SYS: VALVE-2 = 21
. .
. .
. .
SYS:VALVE-16 = 35
For each needed system valve we have to repeat these appropriate selections.
It is also possible to distribute the system valves onto different output modules.