Filter
Top Products
90003749(1) [NGA-e (Software CLD 2.3/MLT 3.1.X)] 04/98
NGA 2000
5 - 41
♦ Go to the line you want with the ↑↑ -key or the ↓↓ -key. If there are more than eight source
modules available you have to press the F3 key to go to another menu page.
♦ Select the tag of the module with the ENTER key or the →→ -key:
The display will go back to the menu "DIO-MODULE INPUTS" automatically.
The tag of the module selected will appear in the line "Signal comes from".
3) Select any function:
♦ Change to the line "Choose function..." with the ↓↓ -key.
♦ Press the ENTER key or the →→ -key to change to the submenu "FUNCTIONS":
♦ Go to the line you want with the ↓↓ -key or the ↑↑ -key. With the F3 key you can go to
other menu pages containing further available signals:
• SYS:Program-Cal
• SYS:Cancel-Cal
• SYS:CAL-Test-Mode
• SYS:AM-Zero-Gas
EXPERT BACK
>>> <<<
CLD
F1 F2 F3 F4 F5
95.0 ppm
Analyzer Modules
NGA Control module
CLD
INFO
EXPERT BACK
>>> <<<
INFO
CLD
F1 F2 F3 F4 F5
95.0 ppm
- FUNCTIONS -
AM:Zero-Cal
AM:Span-Cal.
AM:Range-1
AM:Range-2
AM:Range-3
SYS:Zero-Cal
SYS:Zero/Span-Cal
AM:Range-4