Filter
Top Products
90003749(1) [NGA-e (Software CLD 2.3/MLT 3.1.X)] 04/98
NGA 2000
5 - 37
3) Select any signal:
♦ Change to the line "Choose signal..." with the ↓↓ -key.
♦ Press the ENTER key or the →→ -key to change to the submenu "Signals":
♦ Go to the line you want with the ↓↓ -key or the ↑↑ -key.
With the F3 key you can go to other menu pages containing further available signals:
• RANGE OVERFLOW
• RANGE UNDERFLOW
• FLOW TO LOW
• FLOW TO HIGH
• RANGE 1, 2, 3, 4
• OZONATOR OFF
• NOx MODE
• NO MODE
• or further signals, if need be:
EXPERT BACK
>>> <<<
CLD
F1 F2 F3 F4 F5
95.0 ppm
Analyzer Modules
NGA Control module
CLD
INFO
HOME ESCAPE MORE BACK INFO
CLD
F1 F2 F3 F4 F5
95.0 ppm
Signals
NORMAL
MAINTENANCE REQUEST
FAILURE
CAL. IN PROGRESS
ZERO IN PROGRESS
ZERO FAILED
SPAN FAILED
SPAN IN PROGRESS