Filter
Top Products
90003749(1) [NGA-e (Software CLD 2.3/MLT 3.1.X)] 04/98
NGA 2000
5 - 45
Main Menu — Expert controls and set up
↓↓
Auxiliary module set up
↓↓
In the menu "Auxiliary module set up" you can select any of the following types of micro
processor controlled auxiliary modules:
1) I/O Module with three alarms
2) Autocal I/O
3) Syscal I/O
If one of these auxiliary modules is available you will find its corresponding tag in a line of
this menu. If there exist more than eight of such modules you can change to another
menu page with the F3 key.
Press the ENTER key or the →→ -key in the line where the tag of the module is displayed to
change to the setup submenus of the corresponding I/O board.
For further Informations please contact your customer service or look at the manual of the
I/O board!
MAIN BACK
>>> <<<
INFO
CLD
F1 F2 F3 F4 F5
95.0 ppm
Auxiliary module set up
Select any auxiliary module for set up.
Parameter: 3
5.3 Auxiliary Module Set up