Filter
Top Products
Stvlus
Color
Se
fvice
Manual
Product Description
Indicators
Operate
On
when the printer is on. Blinks during power on and off sequence.
Data
On when print data is in the input buffer. Data and Pause lights
blink if an error occurs.
Paper Out
On
when the printer is out of paper. Blinks when a paper jam
occurs.
No Ink Cartridge
On
when the ink is exhausted.
Economy
On
when economy printing mode is selected.
Condensed
On
when condensed printing mode is selected.
Font
These
LEDs indicate the selected font.
Pause
On
when printing is paused.
1.4.2 Panel Operation at Power On
You can activate the following modes by doing the following:
Self-test mode
Turn on the printer while holding down the
Load/Eject
button.
Hex dump mode
Turn on the printer while holding down the
Font
and
Load/Eject
buttons. Once this mode is selected, the printer prints all received
data in hexadecimal format.
Demonstration mode
Turn on the printer while holding down the
Alt
button.
Default setting mode
Turn on the printer while holding down the Economy/
Condensed
button. For more information about the mode, see
Section 1.4.3.
Initialize EEPROM
Turn on the printer while holding the Alt, Font, Load/Eject, and
Pause
buttons.
Rev. A
1-13