Filter
Top Products
Disassembly and Assembly
Stylus Color
service
Manual
3.2.5.7
Carriage Home Position Sensor Removal
1. Remove
theprinter
mechanism. (See section 3.2.4.)
2.
Discomect
the sensor cable from the
arriage
home position sensor.
3. Unhook the 3 notches securing the carriage home position
sensor to the upper frame. Then
remove the carriage home position sensor.
Sensor Cable
.
.
k.
Figure 3-16. Carriage Home Position Sensor Removal
3.2.5.8 PE Sensor Removal
1.
Remove
theprinter
mechanism. (Seesection32.4.)
2. Disconnect the connector
horn
the PE sensor.
3.
Rotate the printer mechanism upside down; use tweezers to release the 2 hooks securing the
PE sensor to the paper feed roller assembly; then remove the PE sensor.
Bottom Frame
I
Figure 3-17. PE Sensor Removal
3-14
Rev. A