Filter
Top Products
Adjustments
Stylus Color
*rvice
R&nual
7.
8.
9.
Turn the printer power off at once.
Move the carriage to the center
manually
while
pressing the carriage lock lever, and remove
the two ink cartridges.
Remove the rubber cap that covering a head screwat a side of color inkcartridge and then
loosen(but
do not remove) three screws. (Refer to figure 4-6.)
Figure 4-6. Removing the Rubber Cap
Afier
replacing the
spacw,
always install new ink cartridges before returning the
pn”nter
to
the user. At this time, use the ink cartridges that are exclusive for semice (Monochrome:
1020626, CMY: 1020627). You can
re-use
the old ink cartridges for other
pu~oses.
10. Change the spacer
angular(for
monochrome head) to new one with referring the figure 47.
(Replace spacer angular while using the tweezers to push the base head toward the rear.)
Rev. D
4-7