Filter
Top Products
Product
Oesct’iptkm
St’jms
Cokw
SawicO
ManUd
1.4.3 Default Settings
The printer can save some printer setting parameters that define its functions at
initializatkn.
You
can change these parameters by using the printer’s default setting mode.
e
1.4.3.1 Default Setting Items
You can
use the
det%ult
setting mode to change the settings listed in the table below. Activate the
default-setting mode by holding down the
Economy/Condensed
button while turning on the
printer.
Table 1-12. Default Setting Items
Menu
Contents
Character table
Print direction
Network l/F mode
Auto line feed
Loading position
Interface mode
Auto l/F wait mode
Description
Selects the character table
Controls the print direction. (See Tables 1-12 and 1-13)
Auto
Bi-D
Uni-D
Off: For normal environments.
On: For network environments.
On: Valid
Off: Invalid
3.0/8.5
mm (0.12/0.33 in.)
Auto
I/F
mode
Parallel l/F mode
Seriil
l/F mode
Optional l/F mode
1 0/30 seconds
Table 1-13. Characteristics of Print Direction Mode
mct31111
.
.
off
.
3.0
mm
.
10 sec.
ttem
I
Black and White Printing
I
Color
(CMYK)
Printing
Throughput and quality is
Throughput is better.
Auto
better.
Color quality with special paper is
WOW.
(Color correction depends on the printing direction.)
Throughput is best.
Throughput is better.
Bi-D
Print quality may be down.
Color quality with special paper is worse.
(Color correction depends on the printing direction.)
Uni-D
Throughput is worse.
Throughput is worse.
Print quality is better.
Color quality is best.
Table
1-14.
Printing Direction and
ESC
U Command
l)efaul:~~tting
Auto
Bi-O
Uni-D
r
ESC
UO
ESC
U1
None
ESC
UO
ESC
UI
None ESC
UO
ESC
U1
None
Character mode
(for
MS-DOS?
Auto
Auto
Auto
Bi-D
Uni-D
Bi-D
Uni-D Uni-D Uni-D
Raster graphics
mode (fo~
Bi-D
Uni-D
Auto
Bi-D
Uni-D
Bi-D
Bi-D Uni-D
Uni-D
Vvindows
)
*
Note:
Printing
ditection
is
controlkdby
dtiverin
IMndows
entimnment
1-14
Rev.
A