Filter
Top Products
EPSON Stylus Photo 750 Revision A
Maintenance Overview 92
6.1.3 Lubrication
The type and amount of oil and grease used to lubricated the printer
parts are determined based on the results of internal evaluations.
Therefore, be sure to apply the specified type and amount of oil and
grease to the specified part of the printer mechanism during servicing.
Table 6-1. Specified Lubricants
Table 6-2. Lubrication Point
CAUTION
„
Never use oil and the grease other than those
specified in this manual. Use of different types of
components can damage the component or give
bad influence on the printer function.
„
Never apply larger amount of lubricate than
specified in this manual.
Type Name EPSON Code Supplier
Grease G-26 B702600001 EPSON
Oil 0-12 1038991 EPSON
No. Lubrication Type/Point Remarks
1
<Lubrication Point>
• Contact between “Roller, PF2 and
“Paper Guide, Rear”.
<Lubrication Type> G-26
<Lubrication Amount>
• A half turn of “Roller, PF”
• Apply grease while rotating
“Gear, 67.2”.
• Do not attach the grease to
the paper path.
• Use a syringe to apply it.
2
<Lubrication Point>
• Contact points between “Paper Guide,
Front” and each roller:
“Roller, PF” (1 point)
“Roller, Exit” (2 points)
<Lubrication Type> G-26
<Lubrication Amount>
• 10-mm long for “Roller, PF”
• 2-mm long for “Roller Exit”
• Lubricate the contact points
between the hooks on “Paper
Guide, Front” and each roller.
• Do not attach the grease to
the paper path.
• Use a syringe to apply it.
3
<Lubrication Point>
• Contact points between the carriage
assembly and “Frame, Upper”.
<Lubrication Type> G-26
<Lubrication Amount>
• Range from the HP sensor installation
point to the point where “Guide Plate,
Cable” is attached.
• After lubrication, make sure
that the carriage moves
smoothly.
• Use a syringe to apply it.
• Use a syringe to apply it.
4
<Lubrication Point>
• “Gear 67.2.”
• *Combination Gear, 16,21.6”
• “Gear, 23.2”
<Lubrication Type> G-26
• Rotate gears after applying
grease to evenly distribute it.
• Use a syringe to apply it.