Filter
Top Products
R
ESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0)
12
Functional Specifications
Printer Components: Buttons, Hoppers and Cover
This illustration shows the features found on the front of the Card Printer.
Term Description
On/Cancel
button
The On/Cancel button turns the Printer ON and OFF.
• It also serves to cancel the current print job and reset the Printer
for the next print job.
• If a card is left within the Printer after a print job is canceled, it will
automatically be ejected when the Printer is turned back ON.
On-line button
The On-line button takes the Printer on and off-line.
• The Printer must have the on-line light illuminated in order to
print.
• When flashing, the on-line light also serves to indicate a print
error condition.
Card Input
Hopper
The Card Input Hopper is where blank cards are loaded.
Card Output
Hopper
The Card Output Hopper is where printed cards eject. An
Attachable Card Output Hopper is included with the Printer and
serves to catch cards once they have finished printing.
• To attach this hopper, simply open the Top Cover of the Printer
and slip it over the edge of the Printer’s baseplate.
• Once the Top Cover is closed, it will hold the hopper securely in
place.
Top Cover
The Top Cover tilts from front-to-back to open and is how you
access the inside of the Printer to load cards and Ribbon. (Note:
The Top Cover must be shut in order for the Printer to print.)