Filter
Top Products
R
ESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0)
99
Making Mechanical Adjustments to the Printhead (continued)
Caution: In order for the printer to function properly with the new Printhead
Assembly, you MUST have firmware version 1.0.7. The firmware version of the printer is
shown on the edge of the Self Test print.
Contact FARGO Technical Support for a firmware update at (952) 941-0050 or FAX (952)
941-1852.
Note: Be sure to record the total number of passes the printer has made to date. This is
necessary for warranty purposes in order to accurately count the total number of passes
made by each new printhead. To have the printer report the total number of passes made to
date, press and hold the on-line button for 12 seconds. A card will be printed showing this
number. Store this card in a safe place so you can accurately determine the pass count of
the printhead if the need arises.