Filter
Top Products
142 SPARC Enterprise T5120 and T5220 Servers Service Manual • July 2009
FIGURE: Installing the DVD/USB Module (Illustrates installing in a SPARC Enterprise
T5120 server)
2. Slide the pull tab back into the system.
3. Install the hard drive you removed during the DVD/USB module removal
procedure.
4. Plug in the power cords.
See “Connect Power Cords to the Server” on page 178.
5. Power on the system.
See “Power On the Server Using the poweron Command” on page 179 or “Power
On the Server Using the Front Panel Power Button” on page 180.
Related Information
■ “Remove the DVD/USB Module” on page 139
■ “Servicing the Hard Drive Backplane” on page 152