Filter
Top Products
150 SPARC Enterprise T5120 and T5220 Servers Service Manual • July 2009
FIGURE: Installing a Hard Drive Cage (Illustrating Installation in a SPARC Enterprise
T5220 Server)
2. Connect the hard drive data cables (panel 1).
Follow the proper cable routing for your server model. See the HDD cable routing
diagrams in the following topics:
■ “Internal Cables for Onboard SAS Controller Cards in SPARC Enterprise T5120
Servers” on page 188
■ “Internal Cables for Onboard SAS Controller Cards in SPARC Enterprise T5220
Servers” on page 202
Press the plug into its socket until the plug snaps into place.
Note – If the cables do not reach the hard drive cage, perform this step after Step 4.