Filter
Top Products
178 SPARC Enterprise T5120 and T5220 Servers Service Manual • July 2009
FIGURE: Release Tabs on the Rail
2. While pushing on the release tabs, slowly push the server into the rack.
Ensure that the cables do not get in the way.
3. Reconnect the cables to the back of the server.
If the CMA is in the way, disconnect the left CMA release and swing the CMA
open.
4. Reconnect the CMA.
Swing the CMA closed and latch it to the left rack rail.
Related Information
■ “Reinstall the Server in the Rack” on page 176
▼ Connect Power Cords to the Server
● Reconnect both power cords to the power supplies.