194 SPARC Enterprise T5120 and T5220 Servers Service Manual • July 2009
FIGURE: Hard Drive Data Cable Routing for SAS RAID Controller Card in Eight-Disk
Capable SPARC Enterprise T5120 Servers
Note – For information about installing PCIe HBA cards, refer to the document,
Installing the StorageTek SAS RAID HBA Into the SPARC Enterprise T5120 and T5220
Servers.
Figure Legend
1 Route the cable between the PCIe slots and FB-DIMMs
2 Route the cable through the cable retainer
3 Route the cable along the power supply midwall
4 78 cm cable routing through the channel on the clear plastic air duct
5 Proper positions of heat-shrink tubing
6 Route the cable through the fan midwall to the hard drive backplane