Identifying FRUs in SPARC Enterprise T5120 Servers 185
The following table identifies the I/O components in the server and points to
instructions for servicing them.
TABLE: I/O Components (SPARC Enterprise T5120 Servers)
Item FRU Replacement Instructions Notes FRU Name (If Applicable)
1 Top cover “Remove the Top Cover”
on page 67
“Install the Top Cover”
on page 175
Removing top cover
while the system is
running will cause an
immediate shutdown.
N/A
2 Hard drive cage and
hard drive backplane
“Servicing the Hard
Drive Cage” on page 146
“Servicing the Hard
Drive Backplane” on
page 152
Must be removed to
service hard drive
backplane and front
control panel light pipes.
/SYS/SASBP
3 Left control panel light
pipe assembly
“Servicing Front Control
Panel Light Pipe
Assemblies” on page 156
Light pipe bracket is not
a FRU.
N/A
4 Hard drives “Servicing Hard Drives”
on page 69
Hard drives must be
removed to service the
hard drive backplane.
See “Four-Drive Capable
Backplane Configuration
Reference” on page 77 or
“Eight-Drive Capable
Backplane Configuration
Reference” on page 78
5 DVD/USB module “Servicing DVD/USB
Modules” on page 138
Must be removed to
service the hard drive
backplane.
/SYS/DVD
/SYS/USBBD
6 Right control panel light
pipe assembly
“Servicing Front Control
Panel Light Pipe
Assemblies” on page 156
Light pipe bracket is not
a FRU.
N/A