Filter
Top Products
154 SPARC Enterprise T5120 and T5220 Servers Service Manual • July 2009
FIGURE: Removing a Hard Drive Backplane (Illustrating removal from a SPARC
Enterprise T5220 server)
3. Slide the backplane down and off the hard drive cage retention hooks.
4. Place the hard drive backplane on an antistatic mat.
Related Information
■ “Install the Hard Drive Backplane” on page 154
▼ Install the Hard Drive Backplane
1. Slide the backplane under the retention hooks on the hard drive cage.
2. Install the No. 1 Phillips screws that secure the backplane to the hard drive
cage.
■ Two screws secure the backplane in the SPARC Enterprise T5120 server. See the
first figure below.
■ Four screws secure the backplane in the SPARC Enterprise T5220 server. See the
second figure below.