Filter
Top Products
4. Touch Distinctive Ring.
5. A message appears stating that this setting should not be changed unless you have multiple
numbers on the same telephone line. Touch Yes to continue.
6. Do one of the following:
●
Touch the ring pattern assigned by your telephone company to fax calls.
●
Touch Ring Pattern Detection, and then follow the instructions on the printer control panel.
NOTE: If the Ring Pattern Detection feature cannot detect the ring pattern or if you cancel the
feature before it finishes, the ring pattern is automatically set to the default, which is All Rings.
NOTE: If you are using a PBX phone system that has different ring patterns for internal and
external calls, you must call the fax number from an external number.
Set the dial type
Use this procedure to set tone-dialing or pulse-dialing mode. The factory-set default is Tone. Do not
change the setting unless you know that your phone line cannot use tone dialing.
NOTE: The pulse-dialing option is not available in all countries/regions.
To set the dial type
1. From the printer control panel display, touch Setup.
2. Touch Fax Setup, and then touch Preferences.
3. Touch Dial Type.
4. Touch to select Tone Dialing or Pulse Dialing.
Set the redial options
If the printer was unable to send a fax because the receiving fax machine did not answer or was
busy, the printer attempts to redial based on the settings for the redial options. Use the following
procedure to turn the options on or off.
●
Busy redial: If this option is turned on, the printer redials automatically if it receives a busy signal.
The default is On.
●
No answer redial: If this option is turned on, the printer redials automatically if the receiving fax
machine does not answer. The default is Off.
●
Connection problem redial: If this option is turned on, the printer redials automatically if there has
been a problem connecting with the receiving fax machine. Connection problem redial works
only for sending faxes from memory. The default is On.
To set the redial options
1. From the printer control panel display, touch Setup.
2. Touch Fax Setup, and then touch Preferences.
64 Chapter 6 Fax ENWW