Filter
Top Products
The color graphics display shows the wrong language
Solution You can change the language settings at any time from the Setup
Menu. For more information, see Set your language and country/region.
The wrong measurements are showing in menus on the color graphics display
Solution You might have selected the incorrect country/region on your HP All-
in-One. The country/region you select determines the paper sizes shown on the
color graphics display.
To change the country/region, you must reset the language settings. You can
change the language settings at any time from the Setup Menu. For more
information, see Set your language and country/region.
I received a message on the color graphics display to align the printer
Solution Printer maintenance is required to ensure excellent print quality. For
more information, see Align the printer.
I received a message on the color graphics display that the printer alignment
failed
Cause The incorrect type of paper is loaded in the main tray, for example,
colored paper, paper with text on it or certain recycled paper.
Solution Load unused plain white letter or A4 paper into the main tray, and
then try the alignment again.
If the alignment fails again, you might have a defective sensor or ink cartridge.
Contact HP Support. Go to www.hp.com/support. If prompted, choose your
country/region, and then click Contact HP for information on calling for technical
support.
Chapter 14
156 HP Photosmart 3300 All-in-One series
Troubleshooting