Filter
Top Products
Note If you are using a proxy server in your browser, you might need to
disable it to access the Embedded Web Server.
5. If you need to change the language displayed in the Embedded Web Server, do
the following:
a. Click the Settings tab.
b. Click Select Language in the Settings navigation menu.
c. In the Select Language list, click the appropriate language.
d. Click Apply.
6. Click the Home tab to access device and network information, or click the
Networking tab to access more network information or to modify network
information.
7. Make any configuration changes.
For more information see Use the Embedded Web Server setup wizard.
8. Close the Embedded Web Server.
Use the Embedded Web Server setup wizard
The network setup wizard provided in the Embedded Web Server gives you an
intuitive interface to your network connection parameters. For more information on
how to open the Embedded Web Server, see Access the Embedded Web Server.
1. Click the Networking tab.
2. Click Wired (802.3) or Wireless (802.11) in the Connections navigation menu.
3. Click Start Wizard, and then follow all of the wizard instructions.
Network configuration page definitions
The configuration page shows the network settings for the HP All-in-One. There are
settings for general information, 802.3 wired (Ethernet), 802.11 wireless, and Bluetooth
®
.
For information on how to print a network configuration page, see View and print
network settings. For additional information on terms used here, see the Network
Glossary in the onscreen HP Image Zone Help that came with your HP All-in-One.
For information on using the onscreen HP Image Zone Help, see Use the onscreen
Help.
User Guide 77
Network setup