Filter
Top Products
Chapter 9 Remove/Replace Procedures
73
This action will swing the upper front bezel open on its hinge teeth.
6. Swing the upper bezel completely open and remove it from the front of the Server.
Release Tabs (2)
Removing the Upper Front Bezel
Replacing the Upper Bezel
The upper front bezel uses hinge teeth, instead of a normal hinge assembly, to engage each side of the hinge
and pivots on these when opening or closing the upper bezel.
1. Hold the upper bezel next to the chassis, and align the hinge teeth, both upper and lower, as shown in
the following illustration.
The hinge teeth can only fit together within the space allowed, so it should fit on the first try.
2. Close the upper bezel, swinging it to the left, where it will engage the release tabs.
3. Push the upper bezel closed so it engages the release tabs.
The release tabs should snap into place.