Filter
Top Products
Chapter 1 Specifications
8
Hardware Specifications
Specification Characteristics
Processors This HP Server supports Intel Celeron or Intel Pentium III processors (system board
automatically detects processor FSB and changes accordingly):
Intel Celeron - 850 MHz and above with 100 MHz FSB and Integrated 128K L2 cache on
processor
Intel Pentium III - 1.13 GHz and above with 133 MHz FSB and Integrated 512K L2 cache on
processor
Chipset VIA Pro133T chip set with 33 MHz PCI and 133 MHz FSB speed support
Memory Supports up to three SDRAM DIMMS for a maximum total of 1.5 GB.
Supported DIMM type and sizes: 128MB, 256MB, or 512MB registered, 168-pin, 3.3 volts, 72
bits wide, ECC single-bit correcting, multi-bit detecting.
Video Embedded ATI Rage XL video chip with 4MB SDRAM. Supports up to 1600x1200, @ 65K
colors. Refer to “Video Display Modes” for more details.
SCSI SCSI model only; single channel Ultra-160 SCSI LVD (Adaptec AHA 29160LP) board at 160
MB/s transfer rate with two 68-pin connectors
IDE Embedded Enhanced-IDE 33/66/100 dual-channel controller.
PCI Bus Five full-length 32-bit PCI slots at 33 MHz and 5 volts
LAN Embedded Intel 82559 10/100 PCI Fast Ethernet Controller.
I/O Two Serial ports; one bi-directional parallel port with ECP/EPP high-speed support; PS/2 style
mouse and keyboard connectors; two USB ports – supports USB printers, external modems, and
mouse and keyboard, but NOS dependant
CD-ROM Bundled CD-ROM drive; IDE interface; 48x speed or faster
Video Display Modes
Resolution
Max. Refresh Rate @ 256
Colors
Max. Refresh Rate @ 65K
Colors
Max. Refresh Rate @ 16.7M
Colors
640x480 200 Hz 200 Hz 200 Hz
800x600 200 Hz 200 Hz 160 Hz
1024x768 150 Hz 150 Hz 120 Hz
1152x864 120 Hz 120 Hz 85 Hz
1280x1024 100 Hz 100 Hz 85 Hz
1600x1200 76 Hz 76 Hz Not available