Filter
Top Products
4 - 12
Save bar code on the Programming Chart inside the back cover of this manual. Default = 1.
LED Settings
Disabled Scanner LED Flash
When the scanner is disabled by the POS system, the LEDs can be set to flash by scanning LED Flash On. If you do not
want the LEDs to flash, scan LED Flash Off. Default = LED Flash On.
Bar Code Scanning Delays
Reread Delay
This sets the time period before the Stratos bioptic scanner can read the same bar code a second time. Setting a reread
delay protects against accidental rereads of the same bar code. Longer delays are effective in minimizing accidental
rereads. Use shorter delays in applications where repetitive bar code scanning is required. These settings apply to both
1D and 2D bar codes unless the 2D Reread Delay (page 4-13) is set. Default = Short.
Number of Error Beeps/LED Flashes
LED Flash Off
* LED Flash On
Very Short (400 ms)
* Short (500 ms)
Medium (750 ms)