Filter
Top Products
5 - 2
Aux Port Configuration Codes
Honeywell Scanner Aux Port Configuration
Scan the following bar code to configure the Stratos bioptic aux port to use a Honeywell auxiliary scanner.
Note: See Auxiliary Honeywell Scanner Configuration Codes beginning on page B-1 for common Honeywell hand-held
scanner configuration codes.
Datalogic™ Magellan
®
Aux Port Configuration
Scan the following bar code to configure the Stratos bioptic aux port to use an auxiliary scanner that has been used as an
input to a Datalogic Magellan scanner.
NCR Bioptic Aux Port Configuration
Scan the following bar code to configure the Stratos bioptic aux port to use an auxiliary scanner that has been used as an
input to an NCR scanner.
Wincor Nixdorf Beetle Aux Port Configuration
Scan the following bar code to configure the Stratos bioptic aux port to use an auxiliary scanner that has been used as an
input to a Beetle terminal.
Good Read Beep - Aux Scanner
When reading a bar code with an auxiliary scanner, by default you will hear the good read beep from both the bioptic and the
auxiliary scanner. You may wish to suppress the good read beep from the Stratos bioptic when a bar code is read with the aux-
iliary scanner. Scan Good Read Beep - Aux Scanner to sound the good read beep from only the auxiliary scanner when the
Honeywell Aux Scanner
Datalogic Magellan Aux Scanner
NCR Aux Scanner
Wincor Nixdorf Beetle Aux Scanner